尾矿泥浆脱水设备

News classification

Product

Contact

Guangzhou Longyue Environmental Protection Machinery Equipment  

Co., Ltd.

Contact: Luo Manager

Phone: 020-86861928

Mobile: 13922308680

E-mail:gzlyhbjx@163.com

Fax: 020-86861638

Website: www.gzlydyj.com.cn

Address: No. 46, Hongmian Avenue, Huadu District, Guangzhou


Which components need to be adjusted before the filter press works

Your current position: Home page >> News >> Technical knowledge

Which components need to be adjusted before the filter press works

Date of release:2018-03-29 Author:龙粤环保 Click:

 

The normality of the components is critical to the operation of the filter press. After a long period of operation, many components of the filter press will loosen. At this time, it is necessary to adjust it. What are the components that need to be adjusted in the filter press?

      The first is the press filter plate handle. For the filter plates, the handles not only control the supporting points of the filter plates, but also place them in the equipment, and also fix the uniformity of all the filter plates so that they maintain the overall consistency. We know that the filter plate is the main supporter of the filter chamber, and each filter plate has a split hole. As long as all the filter plate holes on the filter plate are arranged on a straight line, the filter chamber is composed of Can play a role in filtration. The importance of the handle to the filter plate can be seen, and due to the equipment in the work time, the filter plate needs to be repeatedly dragged and squeezed, and these series of actions all require the handle to be completed as an intermediate, so it is inevitable that the handle will have a certain The shift or the looseness of the screw. Since the handle is so important to the filter plate, we need to make periodic adjustments to the handle of the filter plate to restore it to its original condition.

       Followed by the filter press hydraulic control table. We used the filter press equipment in the past, according to the production needs, we may need to adjust the pressure generated by the hydraulic system, may be turned up or down, and we all know that can be through the hydraulic pressure is Specific introduction of components that need to be adjusted.


The address of this article:http://en.gzlydyj.com.cn/news/379.html

Key word:带式压滤机,泥浆脱水机,带式污泥脱水机

Recently browse: