Sludge filter press performance advantages

Sludge filter press maintenance:

Electromechanical part

1. Pay attention to whether there is oil in the cleaning pump and mud and whether the anchor bolt is loose.

2. Check whether there is mechanical lubricant in the sludge mixer, medicine mixer, belt reducer, and whether the screws are loose.

3, the air compressor and conveyor belt drive part of the regular refueling to maintain the oil level, air compressor air tank water once a day.

4. Check if the trip switch and solenoid valve are damaged before driving. Replace if necessary.

Folding pneumatic part

1, pay attention to compressed air pipe, can not touch Mars and squeeze.

2. The oil cup and oil level in the control box should be kept at the liquid level, and the oil should be changed once in three months in order to ensure the normal operation of the gas tank.

Folding transmission section

1. The drive chain of the speed-regulating motor is added once a month to maintain normal operation.

2. All bearings of the dehydrator are greased once a month with a grease gun.

3. The bearing of the central axis of the eccentricity and tension should be added once every three months.

4, all the bias and tension slider, to ensure that no rust, with oil gun once a week to ensure lubrication and flexibility.

5. Apply all the fasteners and bearing housings of the sludge treatment system once a month to ensure that the parts do not corrode the sewage, sludge and air.

Sludge filter press performance advantages:

1. The filter belt is automatically tensioned and automatically corrected to completely solve the problem of damaging the filter belt due to deviation of the filter belt; the electronic control system has a chain protection device to ensure the safe and reliable operation of the whole machine;

2. Use a variety of anti-corrosion measures to prevent corrosion, long service life;

3. The long design of the triple dewatering zone has high dewatering rate and high mud cake solids content;

4. The principle is simple, components are unified, easy to manage, and easy to maintain;

5. Smooth operation, low noise, less chemical agents;

6. Fast speed, fast adjustment, large output;