How to Overhaul the Filter Press after Stopping Work

On holidays, filter presses in many industries have to stop working. In order to allow the filter press to work better in the future, the maintenance and repair of the filter press equipment will be carried out on holidays to ensure safe and flawless operation. How to repair the filter press? What are the steps? Belt filter press manufacturer Long Yue environmental protection to answer your questions

First, replace the hydraulic oil:

It is recommended that all hydraulic oil in the filter press be replaced once again and the tank should be cleaned. Because of the long working hours, hydraulic oil will deposit impurities in the mailbox of the inner wall of the hydraulic system due to wear. Therefore, in order to use it normally, we need to replace the hydraulic oil.

Second, filter plate handle maintenance:

Since filter presses work for a long time, the operation of the filter plate handles is very apt to cause wear and errors. Therefore, we need to take out the filter plate one by one from the filter press, and carefully check the handle of the filter plate once it is abnormal. , it needs to be repaired immediately. If it is found that the handle is worn more seriously, the belt filter press manufacturer Long Yue Environmental recommends replacing the new handle.

Third, filter plate:

In the operation of the filter press equipment, the filter plate is often moved back and forth, and will also be subjected to a great deal of pressure, which may cause the filter plate to break or the handle of the filter plate to be incorrect. Therefore, belt filter press manufacturers Longyue environmental protection recommend that you stop the filter press work, check whether the filter plate is clean, whether the filter plate has cracked wire, etc. Once an exception occurs, it is recommended that timely repair and replacement, so as to avoid serious impact The normal operation of the filter press.